Brief Description :
Type | Turbo Charger |
Fitment | Custom Modification |
Condition | 100% Brand New, Tested to meet or exceed OEM specifications |
***No installation manual, professional installation highly recommended |
Supplement Information (by manufacturer) :
Compressor Inlet Diameter | 3.00’’ |
Compressor Inlet Flange | Yes, Round |
Compressor Outlet Diameter | 2.00’’ |
Compressor Outlet Flange | Yes, Round |
Compressor Air Ratio | 0.60AR |
Compressor Inducer Diameter | 54.00mm |
Compressor Exducer Diameter | 70.00mm |
Compressor Wheel Trim | 60 |
Wastegate Actuator | Built-in Internal, 10 PSI |
Turbine Inlet Diameter | 2.5’’ |
Turbine Inlet Flange | Yes, 4-Bolt |
Turbine Outlet Diameter | 2.5’’ |
Turbine Outlet Flange | Yes, 5-Bolt |
Turbine Air Ratio | 0.64AR |
Turbine Inducer Diameter | 52.90mm |
Turbine Exducer Diameter | 45.47mm |
Turbine Wheel Trim | 73 |
Bearing Type | Journal Wet-Float |
Cooling Method | Oil Cooled |
*Pressure test for boost leak after installation (to avoid wastegate actuator mis-reading) *Oil change due in 500 miles after turbo installed *Full Synthetic Motor Oil required (to avoid premature turbo failure) |
